> -----Message d'origine-----
> De : Homebrew_PCBs@yahoogroups.com
> [mailto:Homebrew_PCBs@yahoogroups.com] De la part de Stefan Trethan
> Envoyé : juin 14 2006 15:17
> À : Homebrew_PCBs@yahoogroups.com
> Objet : Re: [Homebrew_PCBs] Re: Epson Direct Inkjet with
> Homemade CIS and autoreset
>
>
>
> Actually, most printers only read the chips at start and
> write at power
> down. This is why the (swedish?) method of powering the
> printer up with a
> good chip and powering it down with a bad one works to reset
> the bad one. ...
>
>
> ST
Ya know, you might be on to something here, I had not heard of this
particular technique. I have 2 sets of cartidges; one empty and one brand
new. I start up with the new, switch and reset the old ones back, great
idea!
The swapping of chips would be a pain though. Maybe a dual circuit with
both chipsets, switch from one to the other manually.
Robert
:)