Archive of the former Yahoo!Groups mailing list: Homebrew PCBs

Be cautious of where and how you use solvents such as acetone, MEK &
Methylene Chloride. In addition to health risks these compounds attack most
plastics very aggressively.

DRR

-----Original Message-----
From: Homebrew_PCBs@yahoogroups.com [mailto:Homebrew_PCBs@yahoogroups.com]
On Behalf Of Robert Hedan
Sent: Thursday, June 01, 2006 7:01 AM
To: Homebrew_PCBs@yahoogroups.com
Subject: [Homebrew_PCBs] Re: MEK

> -----Message d'origine-----
> De : Homebrew_PCBs@yahoogroups.com
> [mailto:Homebrew_PCBs@yahoogroups.com] De la part de Mycroft2152
> Envoyé : juin 1 2006 06:14
> À : Homebrew_PCBs@yahoogroups.com
> Objet : [Homebrew_PCBs] Re: MEK
>
>
> Think of MEK as extreme nail polish remover (acetone).
> It's actually the "big brother" to acetone. MEK is a
> very common industrial solvent and must be used with
> respect and all the correct protective equipment.
>
> Great stuff!
>
> Myc

mmmm-okay...

Acetone is a good example that I can relate with, I use it to clean the PCBs
before etching and to remove the toner after etching.

Robert
:)





Be sure to visit the group home and check for new Links, Files, and Photos:
http://groups.yahoo.com/group/Homebrew_PCBs

If Files or Photos are running short of space, post them here:
http://groups.yahoo.com/group/Homebrew_PCBs_Archives/
Yahoo! Groups Links