Archive of the former Yahoo!Groups mailing list: Homebrew PCBs

previous by date index next by date
previous in topic topic list  

Subject: Re: updates on cupric chloride etching

From: "grantfair2001" <grant.fair@...>
Date: 2003-04-09

Yeah, and my tank will hold up to 34 litres, and the Canadian chemical
supplier I found will sell me CuCl for $175/lb. Even 5 litres worth
would be beyond my means!

Grant

--- In Homebrew_PCBs@yahoogroups.com, Adam Seychell
<adam_seychell@y...> wrote:
>
>
> rolanyang wrote:
> > Umm.. you can buy Copper Chloride powder and mix it with water+HCl.
> > It's a lot easier and you can obtain a more accurate concentration
right away.
> > http://www.techfreakz.org/cucl2/?slide=2
> >
> > ~Rolan
> >
>
> Just think 5 liters of etchant at 150g/l of dissolved copper then
> you'll need to 4.4 pounds of CuCl2.2H20 or 5 pounds cost you
> 5∗$39 = US$195 if you buy from http://www.artcraftchemicals.com