This may seem like a silly and basic question but, I've got a bunch of
36"X48" sheets
of FR4 that I need to cut down. Nothing I've tried seems to work. At
least not for long.
Initially, I tried just using my jig saw with a metal cutting blade on
it. I went through 2
and only got about 1/4" out of each. Then I tried just using my
router. I killed the bit
but was able to cut up 1.5 sheets before doing so. Today I picked up
some 7" cut-off
wheels for my circular saw. Each wheel cut about 24" each before
tearing itself free
of the mount.
Any suggestions? I know for smaller pieces I could probably use a
paper cutter as a
cutting shear but I don't know I'm going to get these large pieces cut down.
Lez wrote:
> I have just found a uk site that do a spongless cartirdge for my
> printer (t007) (wished I could find a t009)
>
> They also sell pigment inks etc so I thought I was onto a winner, but
> I read this on their...
> <quote>
>
> These tools are required to fill the spongeless cartridges (you cannot
> use an ordinary syringe). We supply one with each cartridge set but
> you may want additional tools so you don't have to wash them between
> colours.
>
> They are like syringes but have a hollow plunger so that air can be
> withdrawn from the cartridge when the plunger is pulled out and then
> replaced with ink when the plunger is pushed in. They come with a long
> metal tube to allow ink to be loaded from thebottom of our 100ml
> bottles.
>
> </end quote>
>
> Err, dont you just inject the ink into the cartridge ?
>
>
>
> --
>
>
>
> Lez
>
> - Looking for early starwars (episode 4, original starwars)
> recordings, even pirate
> -
> - I dont need your originals just some information about running time
> - and scene cut points
> -
> -
> - also looking for a car, silver or white, 4 doors -
> - diesel with a bosch pump, abs and pas -
> - aircon would be nice, and not a ford -
>
>
> Be sure to visit the group home and check for new Links, Files, and
> Photos:
> http://groups.yahoo.com/group/Homebrew_PCBs
>
> If Files or Photos are running short of space, post them here:
> http://groups.yahoo.com/group/Homebrew_PCBs_Archives/
>
>
>
> SPONSORED LINKS
> Electrical engineering degree online
> <http://groups.yahoo.com/gads?t=ms&k=Electrical+engineering+degree+online&w1=Electrical+engineering+degree+online&w2=Electrical+engineering+degree&w3=Printed+circuit+board&w4=Electrical+engineering&w5=Electrical+engineering+course&w6=Electrical+engineering+graduate+school&c=6&s=211&.sig=j8BDcUZHaUFXRiTdGW1cNQ>
> Electrical engineering degree
> <http://groups.yahoo.com/gads?t=ms&k=Electrical+engineering+degree&w1=Electrical+engineering+degree+online&w2=Electrical+engineering+degree&w3=Printed+circuit+board&w4=Electrical+engineering&w5=Electrical+engineering+course&w6=Electrical+engineering+graduate+school&c=6&s=211&.sig=1hRjimUH1bArkHkhwLHsKQ>
> Printed circuit board
> <http://groups.yahoo.com/gads?t=ms&k=Printed+circuit+board&w1=Electrical+engineering+degree+online&w2=Electrical+engineering+degree&w3=Printed+circuit+board&w4=Electrical+engineering&w5=Electrical+engineering+course&w6=Electrical+engineering+graduate+school&c=6&s=211&.sig=w-9RSkp3c_F5z9sFsIUKCg>
>
> Electrical engineering
> <http://groups.yahoo.com/gads?t=ms&k=Electrical+engineering&w1=Electrical+engineering+degree+online&w2=Electrical+engineering+degree&w3=Printed+circuit+board&w4=Electrical+engineering&w5=Electrical+engineering+course&w6=Electrical+engineering+graduate+school&c=6&s=211&.sig=kdeBl4DzkdrbwYZnXCp4qA>
> Electrical engineering course
> <http://groups.yahoo.com/gads?t=ms&k=Electrical+engineering+course&w1=Electrical+engineering+degree+online&w2=Electrical+engineering+degree&w3=Printed+circuit+board&w4=Electrical+engineering&w5=Electrical+engineering+course&w6=Electrical+engineering+graduate+school&c=6&s=211&.sig=b2N2CgZCtQayHKIbuMnSbw>
> Electrical engineering graduate school
> <http://groups.yahoo.com/gads?t=ms&k=Electrical+engineering+graduate+school&w1=Electrical+engineering+degree+online&w2=Electrical+engineering+degree&w3=Printed+circuit+board&w4=Electrical+engineering&w5=Electrical+engineering+course&w6=Electrical+engineering+graduate+school&c=6&s=211&.sig=4vee4qVM4QxoRdI6upxwMg>
>
>
>
> ------------------------------------------------------------------------
> YAHOO! GROUPS LINKS
>
> ∗ Visit your group "Homebrew_PCBs
> <http://groups.yahoo.com/group/Homebrew_PCBs>" on the web.
>
> ∗ To unsubscribe from this group, send an email to:
> Homebrew_PCBs-unsubscribe@yahoogroups.com
> <mailto:Homebrew_PCBs-unsubscribe@yahoogroups.com?subject=Unsubscribe>
>
> ∗ Your use of Yahoo! Groups is subject to the Yahoo! Terms of
> Service <http://docs.yahoo.com/info/terms/>.
>
>
> ------------------------------------------------------------------------
>
--
<www.kilroysprojects.net>
[Non-text portions of this message have been removed]