I just did a shopping cart for my C84, just waiting to finalize the
mechanics and get the printer back up and 'sliding' before ordering. My
resetter was cheaper:
1 - SK168 universal chip resetter for epson chipped cartridges $19.95/ea.
I'm also getting:
4 - SLC-2400E empty spongeless cartridge w/out chip $5.50/ea.
1 - MISPRO42-SET-MK mispro inkset with universal black 4 2oz bottles $48/ea.
4 - MIS-BADP bottom fill adapter $0.50/ea.
4 - MIS-SYRINGE 10cc lure lock $1.00/ea.
4 - MIS-NEEDLE 20ga lure lock needle 1.5" long $0.25/ea.
I'm getting some spares for the refill accessories. Even if I'm going to
clean them after each use, I'm going to assign one syringe/needle/refiller
set for each ink to ensure no cross-contamination.
After seeing how little ink goes in the stock sponge-type cartridges, I
never want to deal with those again. The spongeless type seem much more
interesting as long as you follow procedure. I'm not going for a remote ink
system yet, not until I see the need.
There are cheaper prices elsewhere, but I prefer to encourage specialty
vendors. This MIS ink might be the best thing for us, I believe in
encouraging them whenever I can. Dealing with multiple vendors is not
always more efficient.
Robert
:)
> -----Message d'origine-----
> De : Homebrew_PCBs@yahoogroups.com
> [mailto:Homebrew_PCBs@yahoogroups.com] De la part de Stefan Trethan
> Envoyé : avril 30 2006 03:38
> À : Homebrew_PCBs@yahoogroups.com
> Objet : Re: [Homebrew_PCBs] Re: Direct inkjet resist on 1.6mm
> FR4 results
>
>
> You can get chip resetters for all epson on ebay for well
> less than $10. 59,95 must surely be wrong for the resetter.
>
> Also note that some printers can be reset or at least frozen
> by software.
>
> ST
>
>
>
> On Sun, 30 Apr 2006 08:43:51 +0200, cristian
> <cristianbip@...>
> wrote:
>
> > Is this the right MIS order?
> >
> >
> > 1. Wide format Funnel Fill
> >
> > Cartridge #CFZ-T5431-PK-FF $38
> >
> > 2. AutoReset Chip, Black, for
> >
> > 4600 #CHP-AR-C84K $15
> >
> > 3. Yellow #MISPRO
> >
> > 4Y $18
> >
> > 4. Magenta #MISPRO
> >
> > 4M $18
> >
> > 5. Cyan #MISPRO 2C
>
> > $12
> >
> >
> total
> >
> > $101
> >
> >
> > Alternate Chip job (more expensive than AutoReset):
> >
> > 1. Chip Reseter #SK188
>
> > $59.95
> >
> > 2. Chip, Black, for
> >
> > 4600 #CHP-R-C84RK $1.95
> >
> >
> > On 4600 is the same chip as on C84.
> >
> > Cristian
> >
> >
>
>
>
>
> Be sure to visit the group home and check for new Links,
> Files, and Photos: http://groups.yahoo.com/group/Homebrew_PCBs
>
> If Files or Photos are running short of space, post them
> here: http://groups.yahoo.com/group/Homebrew_PCBs_Archives/
> Yahoo! Groups Links
>
>
>
>
>
>
>