I'm still waiting to be able to buy MIS ink, I should have funds within
days.
Meanwhile, I've totally stripped the printhead chariot without breaking
anything.
I think it's possible to make a new backplate and relocate the printhead
mechanism. I'm planning on lifting it by about 3/16", that way I should be
able to easily accomodate a PCB chariot. The chassis has at least 1/4"
space at the rear.
I'm also planning on moving the rear upper rollers to the bottom edge of the
backplate, they apply way too much pressure. The cleaning assembly can
easily be lifted, that should not pose a problem.
Robert
:)
> -----Message d'origine-----
> De : Homebrew_PCBs@yahoogroups.com
> [mailto:Homebrew_PCBs@yahoogroups.com] De la part de Robert Hedan
> Envoyé : avril 18 2006 21:20
> À : Homebrew_PCBs@yahoogroups.com
> Objet : [Homebrew_PCBs] Compatibility of Epson C84 for direct
> PCB printing
>
>
> Thought I'd make a separate thread for this subject, this is
> purely mechanicals, not ink.