When is paper paper, not when its kodak paper........
I just found an older pack, it works a treat!
I did the usual clean board, wipe with a dilute etchant to take the
shine off and leave salmon pink (I'm on ferric from maplins uk) then
iron on for about 3 mins etc, drop into cold water.
When you come to take it out the water it peels off with a loud
creaking noise as the toner splits from the glossy backing.
This leaves a toner only coating on the board as opposed to toner and gloss.
This paper is ''kodak inkjet photo paper' 190gm2 cat 178 3547,
kp105417, 38302 41, 04fkc7 17, I dont know which number is specific
to it but its a 50 sheet pack
The one that makes really proud toner and gloss fibre tracks is
'kod-aper glossy inkjet paper' 180gm2 thickness 0.21mm but has no cat
number or barcode or anything and is 25 sheets in a (shrink)wrap
In fact I think its a fake paper, made to look like kodak etc, looks
like I may have been duped I thought I was buying kodak!
On 26/04/06, Lez <lez.briddon@...> wrote:
> And WTF has this all now got to do with TT !
>
> I found some epson 4∗6 photo paper, had a go, not much use it seemed
> to crack the image on it like a mirror.
>
> I have now got a bottle of gum arabic, tried kodak paper coated with
> that, made toner stick to paper like glue but not to the board!
>
>
> I just had another go back with the Kodak paper, I did the usual but
> applied heat for 3 minutes directly onto the paper and it went brown!
>
> It did not stick to the iron, in fact at full heat it was like ironing
> teflon, I left it to soak about 15 minutes, not a thing, its got to be
> the most resiliant paper made for photos.
>
> I started to wirewool through the paper layers at a time until it was
> thin enough to see the image very cleary, I kept working at it till I
> was down to the toner and copper, result, an hour or so of rubbing,
> one near perfect board.....
>
> The toner areas where THICK, really thick, the paper is evil but made
> for a good etch.
>
> So, kodak will work, bt it takes work, and I need new skin for my
> thumbs..........
>
> Off to do another board now....
>
--
Lez
- Looking for early starwars (episode 4, original starwars)
recordings, even pirate
-
- I dont need your originals just some information about running time
- and scene cut points
-
-
- also looking for a car, silver or white, 4 doors -
- diesel with a bosch pump, abs and pas -
- aircon would be nice, and not a ford -