On Mon, 24 Apr 2006 17:58:27 +0200, lcdpublishing
<
lcdpublishing@...> wrote:
> Ah, excellant suggestion! Get the range to work and accept thick
>
> boards, and pass two through at the same time to make up the
>
> difference beyond adjustment - Great idea!
>
>
> Chris
I really believe some sort of flat table must be constructed to allow for
second side alignment.
Thinking about it now it seems to me a printer with bend-over paper path
might be best for that, since the table can ride over the large central
roller. With the semi-straight path printers the paper passes below the
drive rollers i would expect. maybe one can only use two narrow rollers at
the side so there is space for a PCB in the center.
ST