Hello Stefan,
Saturday, April 22, 2006, 11:14:00 PM, you wrote:
> On Sat, 22 Apr 2006 23:04:55 +0200, Zoran A. Scepanovic <zastos@...>
> wrote:
>> Spray is knowh as PausKlaar (sorry no um... on my keyboard). Still,
>>
>> with my monthly erarnings, a price of 7.5 EUR per meter of 355mm
>>
>> graphic film at the prepress office, I can afford to wait for the
>>
>> PCB's to be produced in 2 to 3 hours. For twiddling with LJ's and
>>
>> other stuff, time is money, and I don't have enough time.
> You don't need any um... for writing Pausklar, which is what it is called
> here.
> It's a great label remover. Spray it on, wait a minute, and the label and
> glue peels right off.
> Using it for exposing PCBs never produced good results for me.
>> It's nice that the lot folks are using TT, but second hand LJIII here
>> still costs a lot, and bulk tonner is an ordinary s∗∗∗t.
> I dunno where you live, but a laser printer is not that much more
> expensive than a inkjet. Remanufactured toner didn't work out for me
> either, but others report good results with non-original toners. LJIIIs
> can be bought at ebay for less than 10eur here.
>> For realy urgent stuff, I print the velum on mu oldie Fujitsu
>> PrintPartner 10V (with the tonner above mentioned), exposing the
>>
>> vellum to PVC diluent vapours for approx 5 minutes, letting the
>>
>> diluent to dry (using forced air heather if necessary) and then
>>
>> transferring the artwork to the presentisized boards using the UV
>>
>> lamps (photos in the Files section of this Group), and then etch in
>>
>> HCL+H2O2 solution. This procedure saves me TIME and is keeping my
>>
>> nerves COOL. Works straigh 'from the box' no twiddlies, twaddlies or
>>
>> whatsoever.
> Yes, i have heard about the "solvent vapor" trick, i want to try for ages
> to see for myself what happens...
> ST
> Be sure to visit the group home and check for new Links, Files, and Photos:
> http://groups.yahoo.com/group/Homebrew_PCBs
> If Files or Photos are running short of space, post them here:
> http://groups.yahoo.com/group/Homebrew_PCBs_Archives/
> Yahoo! Groups Links
As you are On-Linr at the moment (sorry rest of the Group) you can
contact me via Yahoo Messenger (zastoyu) or Skype (zastosr) or ICQ
(8-712-400) to discuss more - will be on-line till 00:00)
--
Best regards,
Zoran A. Scepanovic
zastos@...∗∗∗∗∗∗∗∗∗
The amount of expertise varies in inverse ratio to the number of statements understood by the general public.
∗∗∗∗∗∗∗∗∗
Please be advised what was said may be absolutely wrong, and hereby this disclaimer follows. I reserve the right to be wrong and admit it in front of the entire world.
[Non-text portions of this message have been removed]