--- In
Homebrew_PCBs@yahoogroups.com, "Stefan Trethan"
<stefan_trethan@...> wrote:
> Ink cartridges.
> How do i clean them.
>
> inksupply.com as nice spongeless carts for some newer printers, but
not
> for the 600 it seems.
>
> How can i in general clean a ink cartridge to clear it of old ink?
> Wouldn't one need huge amounts of distilled water?
I cleaned out the existing cartidges in the 600 I got. I drilled holes
in the tops (had to anyway to refill) and used a vacuum to pull
cleaning solution through the foam. A nebulizer from the thrift store
pulls hard enough, although it was built for pressure rather than vacuum.
It takes a moderate amount if the cartridge is already mostly used up.
Then I pull just air through it for a while to get most of the water
out. Don't try and dry it out, that's not good anyway and a tiny bit
of water in there won't dilute the ink much.
Steve Greenfield