Oh, that's different then. I just prefered to err on the side of caution.
Too many times I've taken 'stuff' apart only to break it beyond repair. I'm
just so surprised that I've actually gotten the entire cleaning cart back in
there within 1 minute. The trick is to assemble the sliding brush-drawer
into the holding cart beforehand, attach the springs, and THEN clip it into
the printer and connect the hose. When you're taking things out of the
printer, it's not always obvious what the 'tricks' are to put it back
together.
What alternative mixtures can you suggest for a cleaning solution?
I don't have ammonia and don't know where I can get any here. I'll check
for Windex with ammonia, but I'm not sure we have any.
Robert
:)
-----Message d'origine-----
De :
Homebrew_PCBs@yahoogroups.com [mailto:
Homebrew_PCBs@yahoogroups.com] De
la part de Steve
Envoyé : avril 18 2006 15:35
À :
Homebrew_PCBs@yahoogroups.comObjet : [Homebrew_PCBs] Re: RE : Epson Stylus C84 (questions for Steve)
Huh? That's not what I said. I said you shouldn't try to force anything
through the print head with a syringe.
The cartridge itself is an entirely different thing.
Steve Greenfield