--- In
Homebrew_PCBs@yahoogroups.com, Robert Hedan <robert.hedan@...>
wrote:
>
> I think I have it, the darn cartridges are empty, incredible. :(
>
> I started cleaning the insides of the black/yellow/red cartridges
with LCD
> cleaning wipes (MG Chemicals #8242-T). The stubs stopped getting
wet rather
> quickly, and the wipes started coming out the cartridge holes nice and
> clean.
>
> For some reason, both Epson and SSC utilities think there is red and
yellow
> ink even if the cartridges are bone dry. The ink keeps coming out
the blue
> cartridge, that one continues to work well, but the printer can't
work just
> in blue, so that's useless.
Epson printers do not measure actual ink. They only go by counting the
number of shots of ink, and cleaning cycles performed. Usually they
are rather conservative and may still have 1/3 of the ink left, in
fact there is a class-action suit over that.
Canon printers us an optical system to determine when the ink is
actually low.
> Since I'm not able to order on credit card until my daughter empties her
> card (that might take a year), I'm going to buy replacement
cartridges from
> Staples and start fresh. Not much else I can do at this point, at
least I'm
> guaranteed 'some' results if I buy original replacements (start with
black
> for now, I guess). I'd like to get the heads wet as quickly as
possible
> before whatever deposit is in there hardens even more.
Leave the empties installed!
Steve Greenfield