Yes, I need five or less of three different, though related, boards. I
was hoping to avoid having to do the hand work and drilling of individual
boards. Well, so be it. The main issues there for these double-sided
ones is, as always, quality control.
thanks,
Charles
--
>How many boards do u want to make?
>If you need 5 or less, it might be worth it to:
>
>Scan it on a PC photo scanner
>touch up dirty spots with with graphics program
>convert image to 1 bit black+white
>print out with laser printer (same dpi as scan)
>iron onto blank copper board with hot iron
>dissolve and remove paper.
>then etch with chemicals.
>
>
>
>--- In Homebrew_PCBs@yahoogroups.com, dg140@f... wrote:
>> I suppose there is no easy way to copy circuit boards to make new
>ones?
>> I'm working with a few devices which are now in cut-out limbo, so
>I'd like
>> to make more PCBs for them. It'd be nice if some photographic or
>> "photocopying" technique existed whereby one could simply make a
>copy of a
>> PCB. As it is, must I draw it out, do the foil pattern, etc, or
>possibly
>> draw it out in something like OrCAD, and have PCBs done up that
>way?
>> These are not too complex double-sided boards, about 5∗6 inches.
>Any
>> ideas as to how long it can take to redo them on computer so a shop
>can
>> make a batch?
>>
>> Charles
>
>
>Be sure to visit the group home and check for new Bookmarks and files:
>http://groups.yahoo.com/group/Homebrew_PCBs
>
>To unsubscribe from this group, send an email to:
>Homebrew_PCBs-unsubscribe@yahoogroups.com
>
>
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
>