Yeah, I see 2 shorts in the left side, but I was mostly interested in the
fill pattern and in the lines. Volkan was able to get quality traces even
down to very thin lines, most impressive! This would makes things so much
easier.
Now, converting a printer to take standard thickness PCBs would be the next
step. Double-sided PCBs would still be an issue, but I think that can be
solved.
Robert
:)
-----Message d'origine-----
De :
Homebrew_PCBs@yahoogroups.com [mailto:
Homebrew_PCBs@yahoogroups.com] De
la part de Stefan Trethan
Envoyé : avril 14 2006 13:25
À :
Homebrew_PCBs@yahoogroups.comObjet : Re: [Homebrew_PCBs] Re: Epson inkjet results - high resolution
images
I just received the most wonderful high resolution pictures of the inkjet
tests from Volkan.
I _MUST_ have that ink ;-)
i see two flaws in the circuit example, on the left half, one short and
something that looks like a smear? Maybe Volkan you know how those came to
be? But those are minor in view of the good quality of the boards.
Anyway, the images can be found at: <www.trethan.at.tf/pub/volkan>
Thanks for the files, those say much more than the ones in the photos
section and make me all the more eager to try this myself.
ST