Hi again.
Well so much for that - I was going to continue trying to get a good
development but I might as well try something else as I need to get some
PCBs made soon.
I have just finished an email to a knowledgeable fellow, to whom I admitted
that the new photoresist from RS may as well have been a can of whipped
cream for all the good it does.
The reason I am back here again is that I have found (whilst looking for
Riston PCB's) Press 'n' Peel film.
Simply (as they say) copy or print the artwork onto this film with a laser
printer, Iron onto the blank PCB, peel off the film, and etch - simple.
Has anyone used this before and is it as good as they say?
Also I see another chemical, Ammonium Persulphate, that I have never used -
anyone use this and does it have any advantages over Ferric Chloride?
cheers,
Daryl.
----- Original Message -----
From: "Leon Heller" <leon.heller@...>
To: <Homebrew_PCBs@yahoogroups.com>
Sent: Wednesday, April 05, 2006 8:33 AM
Subject: Re: [Homebrew_PCBs] Making the PCB
> ----- Original Message -----
> From: "LogicResearch" <logicresearch@...>
> To: <Homebrew_PCBs@yahoogroups.com>
> Sent: Tuesday, April 04, 2006 7:09 PM
> Subject: Re: [Homebrew_PCBs] Making the PCB
>
>
>> I'm in New Zealand so it RS probably Australian stock and its the spray
>> on
>> stuff from a can although I might try the pre coated boards.
>
> I've never been able to get that spray-on resist to work! It was OK until
> they changed the formula a few years ago. The pre-coated boards will work
> much better.
>
> Leon
> --
> Leon Heller, G1HSM
> leon.heller@...
> http://www.geocities.com/leon_heller
>
> ---
> [This E-mail has been scanned for viruses but it is your responsibility
> to maintain up to date anti virus software on the device that you are
> currently using to read this email. ]
>
>
>
> Be sure to visit the group home and check for new Links, Files, and
> Photos:
> http://groups.yahoo.com/group/Homebrew_PCBs
>
> If Files or Photos are running short of space, post them here:
> http://groups.yahoo.com/group/Homebrew_PCBs_Archives/
> Yahoo! Groups Links
>
>
>
>
>
>
>
>
>
>
> --
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.1.385 / Virus Database: 268.3.4/299 - Release Date: 03/31/06
>
>