The writer's description of the copper pour process is not completely
accurate. He says to rip up the traces and let the autorouter work
while doing the pour. I've never done it that way. I do the pour
(polygon gnd) command ∗after∗ my board is completely routed...auto,
manual or a combination of both sometimes...and I've resized the
traces, etc.
Cheers,
Ted
--- In Homebrew_PCBs@yahoogroups.com, "kilocycles" <kilocycles@...> wrote:
>
> I did a Google on "copper pour" Eagle and found this gem. Here is a
> good link that succintly identifies many of the odd user interface
> aspects of Eagle (for example, "cut" in Eagle really means "copy" in
> the rest of the computer software applications universe).
>
> http://www.piclist.com/techref/com/cadsoftusa/notes.htm
>
> Cheers,
> Ted
>