car's gas line antifreezer, is pure isopropyl alcohol.
why don't use it?
----- Original Message -----
From: kilocycles
To: Homebrew_PCBs@yahoogroups.com
Sent: Saturday, February 18, 2006 1:50 PM
Subject: [Homebrew_PCBs] Isopropyl Alcohol
There was thread awhile back about using isopropyl alcohol as a board
prep cleaner. The typical stuuf you find is 70%, but you can also get
91%, which is what I buy as a wound disinfectant/cleaner of
contacts...but it still has a significant amount of water.
In the 2006 Allied catalog, there is some very desirable stuff:
99.953% pure anhydrous isopropyl alcohol. Pricey for 3.5 oz (100 ml)
at $4.46, but not bad for 500 ml at $6.53. So, it's available.
Ted
Be sure to visit the group home and check for new Links, Files, and Photos:
http://groups.yahoo.com/group/Homebrew_PCBs
If Files or Photos are running short of space, post them here:
http://groups.yahoo.com/group/Homebrew_PCBs_Archives/
SPONSORED LINKS Electrical engineering degree online Electrical engineering degree Printed circuit board
Electrical engineering Electrical engineering course Electrical engineering graduate school
------------------------------------------------------------------------------
YAHOO! GROUPS LINKS
a.. Visit your group "Homebrew_PCBs" on the web.
b.. To unsubscribe from this group, send an email to:
Homebrew_PCBs-unsubscribe@yahoogroups.com
c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
------------------------------------------------------------------------------
[Non-text portions of this message have been removed]