What do you want the per piece cost of the boards to be?
Single or double side?
Are there any screw holes or slots?
Do you want them fully depanelized, or could they be left attached with
perforations?
Dave K
Cliff Ward wrote:
> Does anybody know of a person/business that will make etched PC
> boards from artwork? I recently took over manufacturing of a
> specialty hobby electronics project, and it involves the use of a 1"
> x 2" etched PCB. Unfortunately I do not have the PCB in electronic
> format, only a B&W printout of the artwork (reversed) ready to use
> for transfer method PBC manufacture. I would be interested in
> establishing a relationship with someone willing to make these PCBs
> for me from the artwork. Twenty-eight (28) of the PC boards will
> fit on an 8 1/2" x 11" paper. there are about 60 holes per PC
> board.
>
> I'd probably wish to purchase in batches of 28 or 56 or somewhere
> therabouts.
>
> I would appreciate any leads that could be provided. Persons
> interested in making boards for this project can contact me off list
> to discuss.
>
> Alternatively I am considering a respin of the PCB onto a new
> electronic format file that I can send out for manufacture. Anybody
> have suggestions?