Archive of the former Yahoo!Groups mailing list: Homebrew PCBs

Mike Young wrote:

>I'm really more interested in plating the holes, not just plating for
>plating's sake. Plating tin or solder in addition to plating copper wouldn't
>be much more complicated than just a setup for copper alone.
>
>All the traces, Alan. Drill the board. Plate with copper, including and
>
>

Got the method, the write up is pretty good too. But most things I've
seen on it describe it as a little more problematic than the write up,
so I hope you have good luck as well..

Alan