Hi John,
Also worth noting is that people can actually see your machines!
Chris
--- In Homebrew_PCBs@yahoogroups.com, "crankorgan" <john@k...> wrote:
>
> Chris,
> The Brute is 5 years old and the Hawk is two years old. Many
> people have build them. I just figured I would mention it since
some
> people have been talking about building a CNC driller. People have
> scratch built a Brute for under $200. If you buy a motor system
then
> it will be $300.
>
> John
>
>
> --- In Homebrew_PCBs@yahoogroups.com, "lcdpublishing"
> <lcdpublishing@y...> wrote:
> >
> > Hi John,
> >
> > Ballendo was in here a couple of weeks ago announcing his
Roadrunner
> > [?] router/pcb mills that he is making. His machine, if I
recall
> > correctly, comes complete with motors, drivers, mechanicals,
etc.
> > for $500.00
> >
> > Like everyone else, I have no idea what the machine actually
looks
> > like, but the data he is presenting is impressive for the
price. I
> > don't know for sure either if it comes assembled or not. Just
> > thought I would share that with you in case you were not aware
of
> > his offerings.
> >
> > Chris
> >
> >
> >
> >
> >
> >
> > --- In Homebrew_PCBs@yahoogroups.com, "crankorgan" <john@k...>
wrote:
> > >
> > > Hi All,
> > > I sell plans for two kinds of CNC mills that have been
used
> > > for milling and drilling PCB. They both use Derin Gibs and
Gibs.
> > > Neither uses homemade DRILLED DELRIN bushings. Gibs and Jibs
can be
> > > adjusted at any time so there is no play unlike homemade
bushings
> > that
> > > may be too loose or bind . Both machines can be built using
simple
> > > hand tools. Both machines can be built for around $100 minus
> > > motors-drivers and software.
> > >
> > > John
> > >
> >
>