On Thu, 03 Nov 2005 22:26:21 +0100, lcdpublishing
<
lcdpublishing@...> wrote:
> I am having the most difficult time trying to do toner transfer on
> some circuit boards. I have tried 15 different papers including a new
> batch of Pulsar paper which isn't working either. I changed out the
> toner cartridge on the printer. I have tried about 15 different
> settings on my iron for different temps. I tried 3 different laser
> printers (all that I have). I just cannot get toner to stick to the
> boards.
> I have tried scotch bright, 400 grit paper, 600 grit paper, 1000 grit
> paper, and 1200 grit paper. I clean very thoroughly with acetone, I
> don't touch the copper after cleaning, I don't touch the paper after
> printing.
> I am stumped and getting really frustrated - grrrrrr.
> Sorry, had to vent.
> Chris
at that point i converted the fuser. but here it was only areas that
wouldn't stick.
st