In a message dated 10/18/2002 8:04:13 AM Central Standard Time,
stuart.lamble@... writes:
> Then place on a table with a very simple motor assy.
> The motor assy needs to rock the table like a see-saw.
> To gently move the tank as if on a see-saw, this allows the board to be
> submerged, then aired , then submerged etc.
>
> Simple yet very effective, even without heating the ferric
>
>
Stuart: This has NOTHING to do with the "air"! This motion only allows the
dissolved copper salts to "swish off" so fresh FeCl can "get AT" fresh
copper, again!
[Non-text portions of this message have been removed]