I can increment down below 1, and get some number like it is keyboard transposing with numbers like G5, d3 and so forth. They increment up that way also. Until you go to 1, then it is normal setting.
Very odd
I notuice I also can't get tape laod to HEAR the tape in.
And when I follow sysexe method.
I get to where I press the red button and it doesn't respond to flashing the program number set. (last step in loading sysex data vai midi)
The red button works on other uses, so I can actually manual enter parameters and get the right sounds.
First thought was TAPE LOAD is teh op amp is bad but since I can get to the last step with red button on trying to load or dump data through midi, I am wondering if these problems pint more to a known problem.
Now what.. how to load in original sound data
So odd parameter thing in a setting,
--- In DW8000@yahoogroups.com, "ken_deel" <kenny@...> wrote:
>
> Tired three keyboards (Korg 01/w, D-50, sxkn5000), and get the same thing. About an octave in the center of the keybaord are "dead" notes.
> You go past them and it takes off from where you left off.
>
> NOTES:
> Three 5+ regulators were out, fixed.
> Haven't reloaded the banks yet.
> This is the firts time I have used an Ex-8000, I have an DW-8000.
>
> Please no assumptions relating to the above, I am hoping this issue will be recognized and one of you will have a suggestion based on this issue.
> Thanks.
>
> KD
>