Seems like some messages are getting moderated on this board, so I'll post while I can get some stuff through I guess:
Look under Files->Patches->Ugufru's DW-6000 Patches:
I've uploaded 4 sounds in .syx format for you to enjoy. I've been going through and reinterpreting the patch names written on the front panel of the DW-6000 and here are a few that I've made so far. More to come there...
Also if you look at Photos->Ugufru's DW-6000 Repairs:
I've uploaded three photos from my conversion from the stupid 2-prong power cable to a standard 3-prong cable. Using crimp connectors and a small file to widen the existing hole, I was able to get an OEM jack to fit perfectly without having to solder. One additional photo depicts my conversion from the worn-out soldered-in CR-2032 battery, to a CR-2032 battery holder I was able to find here:
http://www.nkcelectronics.com/battery-holder-board-cr20322032.htmlNext on my DIY list: I'm repairing that hole you see in my case and repainting the non-interface areas a more interesting color. More photos to come!