This -should- work with XP, it is able to read CopyQM-Images, but it
won´t work correctly:
http://www.seasip.demon.co.uk/Unix/LibDsk/#toolsi´ve tried it by myself on a XP machine with closed 720k-hole. Select
disc=>copy=>browse, select a .dsk-image, everything else leave to
auto-detect, next=>"drive/image to write", set this to "a:", driver
"ntwdm" (NOT qm, cause qm is a read-only driver, libdsk will crash, if
you select this driver for write operations . =>next=>format disk. The
program recognizes 80 Tracks, 5 Sectors/Track and writes the disk
correctly, but the DSS won´t read them ("unformated"). Maybe i have to
choose another output driver -or- the secor sizing is incorrect (maybe 5
sectors∗256 bytes instead of 5 sectors∗512 bytes/10 sectors∗256 bytes).
But it seems to be the only solution under widnwos. All other programs
won´t work correctly (samdisk etc).
Greetings
Stef
Glen Stegner wrote:
>
> Well, he could also just buy a very cheap (old) DOS-based PC and that
> will work just fine for CopyQM.
>
> Anyway, I am kind of interested in what you've done to the disk images.
> If you can somehow find an XP-compatible disk image copier, then I think
> this would be worthwhile and I would consider replacing the old CopyQM
> disk images on my site. Until then, I'll stick with the old images and
> CopyQM.
>
> -Glen
>
>
> --- In DW8000@yahoogroups.com, Stefan Rinass <st@...> wrote:
> >
> > Hello,
> >
> > the DSS-1 uses 800K Disks, not 720k. The PC drive electronics itself
> is
> > -able- to read/write them. CopyQM -also- writes the Disks under
> 95/98/ME
> > into 800K format, but XP doesn´t allow a "direct hardware access"
> onto
> > the drive, so CopyQM won´t work. I have modified Glen Stegners
> > DSS1-Disk-Images into "non-CoypQM"-800K-Images, because no other
> program
> > than copyqm is able to write copyqm-images (there is a prog outside
> > which can do that, but it also won´t work on 2000/XP). A direct 1:1
> copy
> > from copyqm-image=>FDD is -impossible-, cause the copyqm-images have a
> > special header inside, which would be also written on the DSS-1 disk
> and
> > which the DSS would not understand.
> >
> > So the only thing you´ll need is a Linux machine or at least a
> Linux
> > LiveCD and my modified images. Then I´ll give you the instructions
> how
> > to write them.
> >
> > Greetings
> >
> > Stef
> >
> >
> >
> >
> >
> > eraser127nl wrote:
> >
> > > Hi, I recently bought an second hand DSS-1. I already downloaden
> some
> > > disk images but the problem is that my computer cannot read the 3
> 720K
> > > disk I got with it. When I format a 1.44mb disk to 720k my diskdrive
> > > won't recognise it so I can't copy the image to the disk (using
> > > copyQM).
> > >
> > > Anyone got a solution? Or is there a way to extract the images and
> > > load it via midi?
> > >
> > > I use WinXP.
> > >
> > > Thanks in advance,
> > >
> > > Siebe Pol, Netherlands
> > >
> > >
> > >
> > >
> > >
> > >
> ------------------------------------------------------------------------
> > > YAHOO! GROUPS LINKS
> > >
> > > ∗ Visit your group "DW8000
> > > <http://groups.yahoo.com/group/DW8000>" on the web.
> > >
> > > ∗ To unsubscribe from this group, send an email to:
> > > DW8000-unsubscribe@yahoogroups.com
> > > <mailto:DW8000-unsubscribe@yahoogroups.com?subject=Unsubscribe>
> > >
> > > ∗ Your use of Yahoo! Groups is subject to the Yahoo! Terms of
> > > Service <http://docs.yahoo.com/info/terms/>.
> > >
> > >
> > >
> ------------------------------------------------------------------------
> > >
> >
>
>
>
>
>
>
>
> ------------------------------------------------------------------------
> YAHOO! GROUPS LINKS
>
> ∗ Visit your group "DW8000
> <http://groups.yahoo.com/group/DW8000>" on the web.
>
> ∗ To unsubscribe from this group, send an email to:
> DW8000-unsubscribe@yahoogroups.com
> <mailto:DW8000-unsubscribe@yahoogroups.com?subject=Unsubscribe>
>
> ∗ Your use of Yahoo! Groups is subject to the Yahoo! Terms of
> Service <http://docs.yahoo.com/info/terms/>.
>
>
> ------------------------------------------------------------------------
>