Hia
Gosh, I would be curious to hear your Poly6!!!
I have a Poly61 that does funny things too, but not as
funny as "patch modulation".
If the pacthes are unstable, may be the memory is
responsible.
The fact that your problem appears after physically
moving the synth could point to a dry solder joint
nearby the memory chip.
Dry joints is a current problem with machines that
old.
Have a look for greyish looking joints, you never
know, it could really be as simple as resoldering a
few.
Good luck!
--- Mike <
tubmyk2@...> a écrit :
---------------------------------
Hello.
I own a Polysix that is having a problem, that I first
thought was related to the battery. I
basically replaced the battery and the diode like
explained on Old Crow's synth page,
except I did not replace the IC chip because the
battery did not seem to have leaked onto
the board and therefore I found no real reason to go
through more of a hack job.
The problem began after just moving the synth from one
room to the next (i know, it
sounds stupid), and all my patches began to modulate
after roughly two seconds if you
kept the keys pressed down. After changing out the
battery I had to reload the patches
back into the synth and half of them don't work, and
the ones that do still modulate. I
already got insight from Scott @ Old Crow, but I
wanted to know if anyone else had
experienced a simliar problem, forcing them to do a
battery replacement and find out it
did not solve the problem..
Let me know, I'm curious to see responses, if any.
Mike T
---------------------------------
YAHOO! GROUPS LINKS
Visit your group "DW8000" on the web.
To unsubscribe from this group, send an email to:
DW8000-unsubscribe@yahoogroups.com Your use of Yahoo! Groups is subject to the Yahoo!
Terms of Service.
---------------------------------
___________________________________________________________________________
Appel audio GRATUIT partout dans le monde avec le nouveau Yahoo! Messenger
Téléchargez cette version sur
http://fr.messenger.yahoo.com