I've never done any Midi Time Code but I did write a short program to extract Midi clock and generate a quarter note clock, start pulse, and stop pulse. It's the MidiClock (rev0.0).DJB.bas program on my page. I use my template as the base which has all the Midi code in it already. This took five lines of code for the main loop and a couple of dozen lines in the Midi code to output the appropriate clocks.
Midi Time Codes shouldn't be any different. It would just be code in the Sysex routines. I believe those are functional although I've not written any code to extract a sysex message.
Dave
--- In ComputerVoltageSources@yahoogroups.com, Jason Proctor <jason@...> wrote:
> >Hi
> >Would it be possible to use the CVS to convert Midi Time Code to an
> >analogue clock? And perhaps to midi clock to ?
> >Cheers,
> >Dennis
>
> if you wanted a pulse on a separate port every
> frame/second/minute/etc, that should be straightforward.
>
> MIDI clock to analogue clock with multiple divisions etc is also
> quite easy. Is this what you're thinking of?