I went to order my 3U panel tonight, and as always, I did a final
check. Imagine my surprise to find out I used the wrong width for a
3U panel! I've updated my design file [DJB-CVS (4 chan).fpd] with
the correct width. I wanted to let anyone know that might have
copied the file.
Dave
--- In
ComputerVoltageSources@yahoogroups.com,
"djbrow54" <davebr@...> wrote:
>
> I was inspired by Jan Czmok's 2U PSIM with the 2x16 LCD. The LCD I
> designed for my PSIM was a 2x8 that fits in a companion 1U module
> (an
> earlier version of the LCD_Support design). I'd much rather have
the
> larger display so was thinking of rebuilding my PSIM module
>
> I also have a companion level shifter module for +/- 5 volt inputs
> (shifted to 0 to +10 volts) that takes up another 1U. This
> functionality is designed into the CVS so it would be easier to
just
> build a new four channel CVS with LCD.
>
> I did a concept 3U CVS panel and uploaded a jpg image to the
> Files>Front Panel folder. I'll have to ponder on this for a while
> but thought I'd share.
>
> Dave
>