You have LEDs in the panel. How did you mount them? I used a small
breadboard and then silicon RTV to the panel. Just curious.
The panel is public so no issue there. As to the LCD, I put a command
in there to change the power up message and store it in eeprom so you
can customize that as well. Once the system is all together and
programmed, the power up message is generally never seen since your
program more than likely displays something anyway.
Dave
--- In
ComputerVoltageSources@yahoogroups.com,
"thealisonproject" <alison@...> wrote:
>
> Hi Everyone
>
> All my parts arrived so I decided to throw a few pics as the
building
> goes forward.
>
> Note: this was my first FPE panel so I had to put a color in there.
I
> didn't think about it until afterwords but no disrespect to Dave
Brown
> for removing ModularSynthesis from the panel which he designed, he
> will be represented on the LCD.
>
> http://thealisonproject.com/cvs.html
>
> Chris
>