Hello all
Does anyone know an alternate for the Seiko 16x2 LCD as it is no
longer listed from Mouser.
Thanks
Chris
--- In
ComputerVoltageSources@yahoogroups.com, "John Loffink"
<jloffink@...> wrote:
>
> I have a limited number of LCD Support PC Boards Rev. X00 and programmed
> Atmel ATTINY2313 chips with code by David Brown available. Some
photos and
> an Excel spreadsheet bill of materials are posted in the Yahoo
groups photo
> and file sections. Dave has some videos at his web site. After
these are
> gone I do not plan on making any more.
>
> MAKE SURE YOU RELOAD THE PARTS LIST FROM THE WEB SITE. THE PART NUMBER
> FOR THE LCD HAS CHANGED. We found a Seiko LCD from Mouser that exactly
> matches the stacking footprint of this PCB. Don't use the apparently
> identical Lumex 16x2 LCD as it reverses power and ground connections
and
> WILL fry your LCD.
>
> The LCD Support PCB adds support for a 16x2 LCD display for the PSIM
or CVS.
>
> Characters are written by sending MIDI data to the device. It also
has a
> MIDI in/out subcircuit for adding MIDI to a PSIM. Finally, it can be
> configured to operate as a standalone MIDI monitor. PCB by John
Loffink,
> AVR code by Dave Brown. The LCD and LCD support PCB mount directly
> to a front panel using 2/56" standoffs and screws.
>
> The board can run off +15 V or + 5 V power. Using +15 V requires a
heatsink
> for the 7805 5 V regulator, as shown. It has a 4/6 pin MOTM/Blacet
> compatible power connector.
>
> Cost is $15 for the PC board Rev. X00, programmed Atmel ATTINY2313,
> four ΒΌ inch #2/56 screws for mounting the LCD inconspicuously to a black
> faceplate, and four #2 washers. Shipping is extra for orders
outside of the
> US and Canada. Additional parts for these boards from Mouser cost
about $42
>
> for the LCD function including LCD and $3 for the MIDI function using
> inexpensive MIDI connectors.
>
> Email me for payment details.
>
> John Loffink
> The Microtonal Synthesis Web Site
> http://www.microtonal-synthesis.com
> The Wavemakers Synthesizer Web Site
> http://www.wavemakers-synth.com
>
>
>
>
> [Non-text portions of this message have been removed]
>