the hpgl dials I used this time were taken from Marc Bareille's site:
http://m.bareille.free.fr/synth.htmlook through his modular panels and you'll find some of each type
(0..10, -5..+5) to extract. you can just copy them into your own panel.
However, there is one thing I don't like about these. The numbers at the
ends (0 and 10) are so low that they may overlap on a jack label on some
panels. I have not yet had a chance to make better dials, but someone on
the syth-diy list pointed me to this program for hpgl dials:
http://stiftsbogtrykkeriet.dk/~mcs/Scale.htmlAnother thing i did to save money: I removed engraving infill on the
dials, but left it on the rest of the panel. They went ahead and did the
infill without charge. This saved a little more, but maybe is not worth
risking that they dont' fill those engravings.
I uploaded an example of the panel I did, $42.
ryan
xamboldt wrote:
> Ryan,
>
> Do you have the HPGL files to share? Pretty please? :)
>
> -Chris
>
> On Apr 25, 2006, at 7:03 PM, Ryan Williams wrote:
>