My $.02 on this.....
I decided not to take on the PSIM as a product due to the RS232 issue.
It does not make business sense to make a music product that does not
have USB and Mac compatibility. The Atom Pro is also very expensive.
It does make sense for dedicated hobbyist use.
I suspect someone will eventually put together a Basic solution that
makes sense in today's market.
Michael A. Firman wrote:
>
> As mentioned here before, I've had really good results with a cheap
> USB-Serial connector
> and VirtualPC running on OSX (my iMac). A USB interface would be nice
> but it sounds
> like much too much work for this package. I am looking for a nice
> (inexpensive) USB
> connected EPROM programming solution since I've had much less success
> with a
> USB-Parallel connector and my current burner/software (a Needham
> EMP-10 and their
> very old DOS software. Although I must add that the DOS software works
> fine in
> VirtualPC but it just can't see the USB-Parallel port).
>
> --- In ComputerVoltageSources@yahoogroups.com, "John Loffink"
> <jloffink@...> wrote:
> >
> > The Basic Atom Pro is based upon the Renesas 3664 processor. Basic
> Micro
> > wraps the 3664 processor with standard hardware port assignments, a
> BASIC
> > library and programming tools to provide the solution.
> >
> > Without hardware or BASIC library support for USB, adding USB is not so
> > easy. It requires adding a device like a Cypress CY7C68001 USB
> Interface,
> > which only comes in surface mount packages. It requires an added
> parallel
> > interface from the BASIC ATOM PRO, pins that we don't have, so a
> bridging
> > solution is needed, such as I2C to Parallel I/O. The other option is an
> > integrated RS-232 to USB bridge, but why build something in that is
> > available off the shelf?
> >
> > Clearly we should keep the RS-232 interface and keep any USB bridges or
> > interfaces external to the CVS.
> >
> > For those without RS-232 ports, buying a 1999-2000 era Intel based
> laptop is
> > an inexpensive option. These will run Windows 98 and have an RS-232
> port.
> > I have one around just for that purpose, purchased for $75 from the
> local
> > school surplus store.
> >
> > John Loffink
> > The Microtonal Synthesis Web Site
> > http://www.microtonal-synthesis.com
> > The Wavemakers Synthesizer Web Site
> > http://www.wavemakers-synth.com
> >
> >
> > > -----Original Message-----
> > > From: ComputerVoltageSources@yahoogroups.com
> > > [mailto:ComputerVoltageSources@yahoogroups.com] On Behalf Of (i
> think you
> > > can figure that out)
> > > Sent: Saturday, April 15, 2006 3:23 AM
> > > To: ComputerVoltageSources@yahoogroups.com
> > > Subject: [ComputerVoltageSources] Re: USB vs. RS-232
> > >
> > > I guess i have to do more reading - i was (possibly incorrectly)
> > > assuming you were still usig the basicatom pro - is this an
> > > incorrect sassumption?
> > >
> > >
> > > >
> >
>
>
>
>
> ------------------------------------------------------------------------
> YAHOO! GROUPS LINKS
>
> ∗ Visit your group "ComputerVoltageSources
> <http://groups.yahoo.com/group/ComputerVoltageSources>" on the web.
>
> ∗ To unsubscribe from this group, send an email to:
> ComputerVoltageSources-unsubscribe@yahoogroups.com
> <mailto:ComputerVoltageSources-unsubscribe@yahoogroups.com?subject=Unsubscribe>
>
> ∗ Your use of Yahoo! Groups is subject to the Yahoo! Terms of
> Service <http://docs.yahoo.com/info/terms/>.
>
>
> ------------------------------------------------------------------------
>
--
Regards,
John Blacet
Blacet Research
http://www.blacet.com[Non-text portions of this message have been removed]