We are going to hang a digital port expander on there.
See 74hc595.pdf in the files section
--- In ComputerVoltageSources@yahoogroups.com, "John Loffink" <jloffink@...> wrote:
>
> I was thinking more of a unique controller I'd like to interface to my
> modular, where a digital IO would be the best means for interfacing.
>
> But it sounds like the MIDI option has lots of favorable applications.
>
> John Loffink
> The Microtonal Synthesis Web Site
> http://www.microtonal-synthesis.com
> The Wavemakers Synthesizer Web Site
> http://www.wavemakers-synth.com
>
>
> > -----Original Message-----
> > From: ComputerVoltageSources@yahoogroups.com
> > [mailto:ComputerVoltageSources@yahoogroups.com] On Behalf Of
> > paradigmshiftbeats
> >
> > --- In ComputerVoltageSources@yahoogroups.com, "John Loffink"
> > <jloffink@> wrote:
> > >
> > > Dave,
> > >
> > > You have some good points for MIDI as an expansion interface. I'm
> > sold.
> >
> > One of the applications I'd use quite often would be the CV-to-midi
> > capability. I had the opportunity to use an Analogue Systems RS-300
> > once, which opened my mind to all sorts of uses, using CV modules as
> > sources to modulate midi devices, whether hardware or software
> > (think about DAW mixing or Kyma); recording analog joystick/JAG
> > movements to midi CCs for playback later; using midi-compatible
> > software to process CV information and spit the result back out to
> > the modular; and so on.
> >
> > Chris Sawyer
> >
>