>
> You've taken an interesting approach to the problem.
>
> I would suggest you simplify your MIDI Yoke configuration for the
> purpose of trouble shooting, i.e., try to establish the desired
> communications pass through on application at a time.
Thanks for the reply.
Well, the deal is to make the sysex data go into cubase for saving
purpouses and the issue is that dump request is possible to make only
from the DX200 editor in XG works and when the signal doesn't come
back to the editor (but would go to cubase only for example), the bulk
dump won't even begin - don't have a clue why.
>
> Also, I would suggest you double check the Options in each program
> to verify that SysEx data is not unintentionally filtered.
Everything seems to be working, but the editor bahaves like it would
lost a proper midi connection to the unit; it doesn't make any changes
in the unit but hangs the sound when I change the values from the
editor an play the voice at the same time.
>
> As an alternative, you might try dumping the contents of your AN200
> to AN1xEdit which has an Export command for saving select Voices as
> individual .SYX or .MID files.
The case here is about Dx200, and it's editor doesn't give such a
possibility. Nobody could help me on the dx200 list yet, so I gave a
try here.