Jerry, what you need to see what's up is an ohmmeter. Measure the
resistance at the farthest ends of the pedal sweep. If the pedal never
reaches 0 ohms, then that problem can most likely be fixed. Just open it up
and make sure the pot is adjusted (loosen the shaft nut and turn the pot
until you get 0 ohms and retighten). If the problem is at the other end of
the resistive range, then the Roland can't be made to work with the AN
correctly without replacing the pot.
>
> > Does anyone use the "foot controller"? >
> > has anyone bought a pedal that works with the
> > AN1x, if so where, and how much?
>
> I use a Roland EV-5 which has a (physical) depth adjustment knob.
> Works fine with the Yammie for most things. Unfortunately, most of
> the cool AN1x routings require that you use the patch mod matrix
> rather than the common settings. Which requires you to program patch
> by patch.
>
> However, mod wheel (for scene morph) is available in the common area.
> One problem I noted is that the Roland is just a little shy of the
> entire morph range (0-127 steps instead of 1-128?). This becomes a
> problem when morphing between two patches that have different
> oscillator tunings. Since the morph does not go all the way (C3 to
> C4) you get stuck with a "wrong" note (B) at the end of the morph. I
> tend not to use such morphs since I detest the sound of stair-stepped
> pitch sweeps, but if you do these you will have a problem with the EV-
> 5. I wonder if there is a way to cure this problem?
>
> I bought it at GC (I forget how much). ZZounds has them for $60.
>
> Cheers,
>
> Jerry
>
>
> --------------------------------------------------------------
> ----------
> Make new friends, find the old at Classmates.com:
> http://click.egroups.com/1/7075/9/_/663009/_/964539449/
> --------------------------------------------------------------
> ----------
>
> Community email addresses:
> Post message: AN1x-list@onelist.com
> Subscribe: AN1x-list-subscribe@onelist.com
> Unsubscribe: AN1x-list-unsubscribe@onelist.com
> List owner: AN1x-list-owner@onelist.com
>
> Shortcut URL to this page:
> http://www.onelist.com/community/AN1x-list
>