Thanks!
But I have a PC, and I don't have a way to try the AN2 files. The
editors I have take ANS or AN1 or ANE files. What I want is the bulk
sysex dump of the whole AN200. You hold [Shift] then hit button [15]
three times, until it says ALL. Then you start recording either a
midi sequence or a sysex file, and hit [15] a couple more times.
It's kind of a long one, takes a few minutes to finish.
There isn't an editor for PC that's really for the AN200, is there?
Thanks,
Pete
--- In AN1x-list@yahoogroups.com, "Dan" <dxalgorithm18@y...> wrote:
>
> I uploaded the AN200 presets in 2 banks of 128 patches using the
> AN200 librarian - Hopefully I did it right. If not, let me know
and
> I'll try again.
>
>
> --- In AN1x-list@yahoogroups.com, "zog2zog2003" <sandersp1@j...>
> wrote:
> >
> > I am finding fun things to do with my semi-working AN200, but I
> would
> > still like to try putting a sysex file into it, of the factory
> > patches. Right now, I can either play the synth through the
> editor,
> > or run the drum part of it. Factory reset didn't fix anything.
> >
> > I found that Midi-Ox has pages for sending the MSB and LSB and
> patch
> > change numbers, also one that will do just the (easy)
> calculations.
> > I have yet to get synth sound from the PLG card that way though,
> just
> > pattern changes on the drums.
> >
> > The drum box sounds good when I midi-up the output to a sampler
> > loaded with 4 channels of different percussion sets. Try it!
> >
> > My previous posts mention I got the AN200 chassis and PLG150-AN
> card
> > separately, and they aren't cooperating.
> >
> > Here's my email:
> >
> > sandersp1@j...
> >
> > Thanks,
> > Pete