--- In
AN1x-list@yahoogroups.com, "Mark Daborn" <darkest.yugo@n...>
wrote:
> Thanks for the help.
>
> I have tried reseting the machine but each time it returns to
the "KRNL" display.
>
> It's a little frustrating because now i have an AN200 that refuses
to make a noise!
>
> I a have a sound blaster live card in my pc and have thought the
midi side of it to be rather dodgy at times. It's forever causing my
machines to lose sync and i suspect this might be the problem. I
shall try the dump again on a friend's usb midi interface and hope
for the best!
>
> Thanks again for the help.
>
I searched the DX200 list here at Yahoo! and found this thread from
May 2003 regarding bulk dumps:
http://launch.groups.yahoo.com/group/DX200/message/504Here's an offbeat idea...perhaps you could load the .MID file into
your sequencer and export it as a .SYX file THEN use a dedicated
SysEx librarian to perform the bulk dump. Don't know if it's worth
your while, but if your friends MIDI Interface alone doesn't get the
job done you might give it a shot...
Jon