Hi Jon,
The studio computer has Audiotrack INCA88 soundcard, Win2k operating system
and everything should be with latest drivers. I know that the midi cables
are working, I was sending and receiving sysex dumps for my Digitech PCM10
pedal.
> It's not that I'm trying to discount the idea of a 'memory failure' it
> just that I've never heard of such a thing in regards to the AN1x.
I'm only suspecting it because I've seen things like this happening with
other MIDI devices (Starting from Alesis mmt-8 for example) ;) ...
>If you provide a little more info on your
> configuration perhaps somebody following this thread might with the same
> config might chime in with an opinion.
Umh, what can I tell you more, I have midi interface(s) and cables connected
to the synth, midi note sending and receiving is working ok from Cubase to
synth and vice versa, but sysex seems to be working only from computer to
the synth (AN1xEdit).
>Store routine from the front panel. IMO, that type of behavior might
>indicate a low
> battery condition. I
Yep, that's one thing I'm little bit worried as well, but then how could it
be affecting because while I'm trying to do bulk dumps I've power connected
anyway?
> What steps are you taking to perform the bulk dumps?
Only using AN1xEdit commands.
I'm sorry I forgot to take installation files for Midi-Ox with me to the
studio so I wasn't able to test that, but hopefully I can do it during the
weekend. In matter of fact I'm going to spend some time with this problem
anyway during the weekend because I really would like to get backup from my
important patches :( ... already printed some blank charts from the .pdf
manual :-/
Cheers,
TimoS
----- Original Message -----
From: "Jon" <jondl_2000@...>
To: <AN1x-list@yahoogroups.com>
Sent: Thursday, June 03, 2004 5:00 PM
Subject: [AN1x] Re: Midi strangeness
> --- In AN1x-list@yahoogroups.com, "Timo Sandholm" <timo.sandholm@u...>
wrote:
> > Hi Jon,
> >
> > I think that I have memory failure in my AN1x, because I tested bulk
dumps
> > yesterday in another computer with different midi interface and the
result
> > was that I was able to receive only one program at time and I needed to
> > close AN1x edit inbetween the sessions.
>
>
> Again I ask - what brand/type of MIDI Interface and what OS were you
running - did
> you have the latest drivers installed from the manufacturer, were you able
to test with
> any other hardware synths? Did you try a separate pair of MIDI cables?
>
> It's not that I'm trying to discount the idea of a 'memory failure' it
just that I've never
> heard of such a thing in regards to the AN1x. And if it were so, I'd think
it would
> manifest itself elsewhere to begin with - such as an inability to Save
Voices using the
> Store routine from the front panel. IMO, that type of behavior might
indicate a low
> battery condition. I
>
> For your issues I still suspect this is a connectivity issue. I can't
recall anybody
> reporting AN1xEdit failing inbetween bulk dumps either - the application
has
> generally proven to be more stable than that. If you provide a little more
info on your
> configuration perhaps somebody following this thread might with the same
config
> might chime in with an opinion.
>
> What steps are you taking to perform the bulk dumps? You do not need to
take any
> action from the AN1x front panel controls when using AN1xEdit - to attempt
> otherwise might confuse the app. Did you try a SysEx bulkd dump utility on
both your
> home and studio computers (MIDI-Ox wasn't it?) If so, how did that work
out?
>
> It might be time to perform a clean install and try over.
>
> Jon
>
>
>
>
> Community email addresses:
> Post message: AN1x-list@yahoogroups.com
> Subscribe: AN1x-list-subscribe@yahoogroups.com
> Unsubscribe: AN1x-list-unsubscribe@yahoogroups.com
> List owner: AN1x-list-owner@yahoogroups.com
>
> Shortcut URL to this page:
> http://groups.yahoo.com/group/AN1x-list
>
> Yahoo! Groups Links
>
>
>
>
>