Hi Alan,
I can imagine your problems with your different routings. I do use a
midi patcher/mixer to change between different midi routings.
A Roland A-880, rather old but working great. It has 8 midi inputs and
8 midi outputs and you can connect every input to every output by
simple button pushes. You can store 64 differnt setups in it, but in
practice it works so simple I just tap in the needed routing on the
fly. I know there are more devices on the market with this kind of
functionality so a little investigation should give you more
alternatives.
Hope this helps.
Grtz Wan
----- Original Message -----
From: "nuvalerium" <alan@...>
To: <AN1x-list@yahoogroups.com>
Sent: Thursday, August 21, 2003 3:02 PM
Subject: [AN1x] Midi help required
> Currently dismantling my set up as I am fitting a new floor and
> rethinking the layout. In about a week when I put it all back
> together again, I need some help to achieve my goal.
>
> Kit involved in this project is:
> Yamaha AN1x
> Ensoniq ASR-10
> Yamaha MU15 sound module
> Soundblaster Live Drive II on my PC
> Midiman Midisport USB 4x4
> Sonar XL 1.0
> Propellerheads Recycle 2.0
> AN1x Editor
> Mackie 1202 VLZ Pro
>
> It gets a little complicated to bear with me.
>
> I want to: Send patches to my AN1x via the editor. Currently
achieved
> by connecting Live Drive midi out on PC to AN1x midi in and setting
> the editor to SB Live midi port (both in and out)
>
> I want to: Play midi files using sonar thru the MU15 sound module.
> Currently achieved by connecting Midisport A midi out to MU15 midi
in
> and setting Sonar Midi out to Midisport A
>
> I want to: Have Recycle connect to my ASR-10. Currently achieved by
> connecting ASR-10 midi in to Midisport B midi out AND ASR-10 midi
out
> to midisport b midi in. (it needs both connections to complete the
> circle)
>
> I want to: Have my ASR-10 play both itself and the AN1x to play at
> the same time in a combination of the two instruments (or vice
> versa). Currently achieved by connecting AN1x midi in to ASR-10 midi
> out or AN1x midi out to ASR-10 midi in.
>
> The trouble is with that last item. AN1x midi in and ASR-10 midi out
> are already used to provide me with one or another of the other
three
> wants on my list. It means disconnecting cables which is a pain in
> the ass.
>
> I have midisport c and d midi outs available and a, c and d midi
in's
> available, but I cannot figure it out how to utilise these ports and
> configure each piece of kit to do what I want.
>
> I hope this makes sense. I have seen some of you guys knowledge on
> Midi which far outstrips mine, so if anyone can help, I would
> appreciate it.
>
> Best wishes
>
> Alan
>
>
> ------------------------ Yahoo! Groups
Sponsor ---------------------~-->
> Buy Ink Cartridges or Refill Kits for Your HP, Epson, Canon or
Lexmark
> Printer at Myinks.com. Free s/h on orders $50 or more to the US &
Canada. http://www.c1tracking.com/l.asp?cid=5511
> http://us.click.yahoo.com/l.m7sD/LIdGAA/qnsNAA/QnLolB/TM
> --------------------------------------------------------------------
-~->
>
> Community email addresses:
> Post message: AN1x-list@yahoogroups.com
> Subscribe: AN1x-list-subscribe@yahoogroups.com
> Unsubscribe: AN1x-list-unsubscribe@yahoogroups.com
> List owner: AN1x-list-owner@yahoogroups.com
>
> Shortcut URL to this page:
> http://groups.yahoo.com/group/AN1x-list
>
>
> Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
>
>