--- In
AN1x-list@yahoogroups.com, "sonarcade" <sonarcade@y...> wrote:
> I've noticed that the midi light doesn't come on the
> pro53 for some knobs although the midi registers in Logic.
I just realized that my control change mode was set on mode 1 and not
mode 2. So midi's fine. But does anyone else that uses this have
any explanations and possible workarounds to the fact that the wave
parameter for VCO1 on the an1x is used as a swtich to only
disable/enable the sawtooth wave and the fine param is used to
disable/enable the square wave? There's a slew of other parameters
that don't match between the AN1x and the Pro53 and I've tried to
manually "dump" a patch from the AN1x to the Pro53 using the control
map for the an1x that I have. So it really seems like Timo's
suggestion of using synthedit is the only way to get around this
problem of not being able to find a way to dump patches onto a VSTi.