Jimmy -
that's easy to fix -
when you select a target , at that very moment you usually have a "DIR"
selection in the amount of this matrix slot.
So the source's current value is directly applied to dest.
You better select the amount at first , like set it to "+1" and then select
the target - then you won't have this problem, as you just need to get ribbon
(f.ex.) to neutral position to get any modulations done to the target away or
turn modul. wheel to full 0 for the same and so on.
Hope that helps.
(I am speaking about the way of working with AN-1x via AN1X-Edit here)
Ray.
spaceanimals wrote:
> Ever notice when you set a parameter to be modulated in the matrix
> that the damn machine resets the value on the patch. Like set the
> filter cutoff to the Z ribbon controller and the next thing you know,
> the patch isn't making any noise because the filter cutoff got turned
> down to 0. This means anytime I call up any parameter in the matrix,
> I first have to check to see what the parameters are first, in case
> they get changed inadvertantly.
>
> Rainbow Jimmy
> http://www.mp3.com/spaceanimals
> http://www.spaceanimals.com
>
>
> Community email addresses:
> Post message: AN1x-list@yahoogroups.com
> Subscribe: AN1x-list-subscribe@yahoogroups.com
> Unsubscribe: AN1x-list-unsubscribe@yahoogroups.com
> List owner: AN1x-list-owner@yahoogroups.com
>
> Shortcut URL to this page:
> http://groups.yahoo.com/group/AN1x-list
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
--
http://www.mp3.com/raymaxer