Hi there again Dysonn,
That does seem weird. I just tried it, and works fine ie. no program preset
change on the JP-8080 from the AN1x.
What input are you using on the JP-8080? MIDI IN or REMOTE KBD IN?
If you're using the latter (REMOTE KBD IN), then that may be the problem. It
appears that input has been designed to have its own keyboard or sequencer
channel devoted to it. It seems one can't disable program changes received
at that port. How frustrating!!!
Unfortunately, that only leaves you a couple of options:
- Use MIDI IN (not Remote Kbd In) but lose the layered 'performance' presets
and arps.
- Purchase another MIDI controller keyboard solely for the JP-8080 for live
use.
(N.B. If you're working with a sequencer, you can connect both ports and
send to either port as required without a drama, but be wary of MIDI
feedback loops ie. ensure the Remote Kbd In is set in the sequencer to
receive from your controller/sequencer, and not set to 'All' or 'Any' and
therefore receiving from everything in your studio - including the JP-8080
and hence the loop).
Not the best solutions, but at least either would get you out of trouble.
I've always wished I could switch off 'aftertouch' on the AN1x, but no can
do there either.
By the way, are you on the JP-8000/8080 lists at www.yahoogroups.com ?
Phil
--
Volume_One available now
www.enigmarecords.com.au
From: "dysonn1" <
dysonn1@...>
Reply-To:
AN1x-list@yahoogroups.comDate: Sat, 23 Feb 2002 20:15:50 -0000
To:
AN1x-list@yahoogroups.comSubject: [AN1x] Re: Program Change--Need Help!!
Hi Phil,
Thanks for the input but I already tried that and it doesn't work, I
don't know why but it just doesn't. It's as if the An1x completely
ignores the JP's settings. If you have any other ideas please post
them. Thanks again.
Dysonn