Hi Phil,
Thanks for the input but I already tried that and it doesn't work, I
don't know why but it just doesn't. It's as if the An1x completely
ignores the JP's settings. If you have any other ideas please post
them. Thanks again.
Dysonn
> Hi Dysonn,
>
> AFAIK, one can't disable program change from the AN1x, however, on
the
> JP-8080, under "MIDI" there's an option called "Tx/Rx ProgChg Sw".
Switch
> this off and the JP-8080 will now ignore any program changes.
>
> Are you working with a sequencer? If so, I'd leave the JP-8080
Program
> Change Switch on, and be sure to not change presets on the AN1x
while
> working/recording/editing a JP-8080 sequence. Maybe you have a need
to
> control both synths from the AN1x at the same time(?), but this is
what I'd
> do.
>
> Hope that helps.
>
> Phil
>
>
>
> From: "dysonn1" <dysonn1@y...>
> Reply-To: AN1x-list@y...
> Date: Sat, 23 Feb 2002 03:07:45 -0000
> To: AN1x-list@y...
> Subject: [AN1x] Program Change--Need Help!!
>
>
> Hi guys, I have an AN1x that is controlling my JP-8080 and I cannot
> figure out how to shut off the program change commands the AN1x is
> sending the JP. Whenever I change an AN1x patch the JP also changes
> its patch which is annoying. Could anyone please give me some
advice
> on how to remedy this. Thanks in advance.
>
> -dysonn
>
>
>
> Community email addresses:
> Post message: AN1x-list@y...
> Subscribe: AN1x-list-subscribe@y...
> Unsubscribe: AN1x-list-unsubscribe@y...
> List owner: AN1x-list-owner@y...
>
> Shortcut URL to this page:
> http://groups.yahoo.com/group/AN1x-list
>
>
> Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/