--- In AN1x-list@y..., "jomany2002" <totte@n...> wrote:
> What happends is that i get a sysex size error when transfering
the
> patches. I just tried the London soundset and some of the
patches
> didn't transfer due to this..
> I seem to get most of them though, maybe I should settle with
that.
>
From your two problem reports I'd hazard a guess that your MIDI
Interface is suspect :-/ What type of MIDI Interface are you using?
FWIW, AN1x SysEx data is sizable and the AN1x can be overrun
when receiving a bulk dump. This is not uncommon but the fact
that you're having such difficulties so frequently might indicate a
problem with your MIDI Interface.
I'd suggest you try sending a 1/3 of a voice set at a time, i.e.,
voices 1-32, then 33-64,etc., simply to determine whether they'll
tranfer reliably. Also, many soundsets - user sound sets,
specifically - normally contain fewer voices then the Yamaha
voice sets. Since there is less data to transfer it stand to reason
there would be fewer overrun errors. Perhaps you should try a
few along the same lines - to determine how prone your MIDI
Interface is to bottlenecking.
> When sending data around the three LED's are flashing a bit.
Is this
> normal or does it indicate a problem?
>
It's normal...and it sounds as though you're using the program
correctly based on the fact that the transfer is occuring.
Hope this helps,
Jon