--- In AN1x-list@y..., <kgilani@e...> wrote:
> I put Mode to poly and layer to single. T-channel to 3, receive-channel to
> 1. And in logic put as track channel 1. I also tried all different channel
> setting.
> But still, the playback comes kinda out of sync.
>
> Any idea?
From your problem description I believe you are trying to record the
MIDI notes transmitted from the AN1x Arp/Seq into Logic and then have
Logic playback those notes - triggering the AN1x. I'm guessing that the
Arp/Seq for the AN1x Voice is still set to 'ON' when Logic begins
playback of the Arp pattern previously recorded and what you are
experiencing is double note events being triggered from both Logic and
the internal Arp/Seq of the AN1x. I'd suggest you turn Arp/Seq 'OFF'
for the AN1x and resave the selected voice before beginning playback of
the recorded track from Logic.
As an alternative to recording the output of the AN1x Arp/Seq into
Logic, you could simply sync the AN1x Arp/Seq to MIDI Clock transmitted
by Logic and simply record the root notes into Logic (not the output
from tha Arp/Seq) and allow the AN1x Arp/Seq to trigger off playback
from Logic. Make sense? The obvious limitation of this approach being
that you can't easily rechannel the Arp/Seq data to another sound
module as you could by recording the Arp/Seq output into Logic. Give
and take.
regards,
Jon