On first thought, it sounds like it has to go on the bench... but wait. I
had some TERRIBLE problems with mine after loading up some patches, so I
re-initialized it to the factory settings and it fixed everything. The
re-init procedure is in the back of the manual somewhere. hope this works
for you
Ed Edwards
Leader: Ezekiel's Wheel »»»»Retro-Progressive Rock««««
http://www.untiedmusic.com/ezekielhttp://artists.mp3s.com/artists/227/ezekiels_wheel.html°·.·°·.·°·.·°·.·°·.·°·.·°·.·°·.·°·.·°·.·°·.·°·.·°·.·°·.·°·.·°·.·°·.·°
°·.·°·.·°·.·°·.·°
----- Original Message -----
From: "Jake B" <drummer@...>
To: <AN1x-list@yahoogroups.com>
Sent: Thursday, July 12, 2001 7:52 AM
Subject: Re: [AN1x-list] Re: outputs
> It is being run into a rolls 10 channel stereo line mixer. Which then
runs
> into a 16 channel peavy mixer.
> should be ok
>
> Jake
> ----- Original Message -----
> From: "Ed Edwards" <edward.edwards@...>
> To: <AN1x-list@yahoogroups.com>
> Sent: Wednesday, July 11, 2001 11:29 PM
> Subject: Re: [AN1x-list] Re: outputs
>
>
> > Sometimes the doctor has to ask personal questions that may embarrass
you
> > like, "How far was your nose in the young ladies room before she slammed
> the
> > door on it?" In your case we'd have to ask, "What are/were you running
> your
> > outputs into? The output circuitry is looking for a standard line level
> > load such as a mixer, keyboard amp or similar input, and without the
> proper
> > load for the An1x final amps all sorts of bad things may happen in the
> > signal chain.
> >
> > Ed Edwards
> > Leader: Ezekiel's Wheel »»»»Retro-Progressive Rock««««
> > http://www.untiedmusic.com/ezekiel
> > http://artists.mp3s.com/artists/227/ezekiels_wheel.html
> > °·.·°·.·°·.·°·.·°·.·°·.·°·.·°·.·°·.·°·.·°·.·°·.·°·.·°·.·°·.·°·.·°·.·°
> > °·.·°·.·°·.·°·.·°
> > ----- Original Message -----
> > From: "Jake B" <drummer@...>
> > To: <AN1x-list@yahoogroups.com>
> > Sent: Wednesday, July 11, 2001 11:15 PM
> > Subject: Re: [AN1x-list] Re: outputs
> >
> >
> > > nope...no clicking or poping at all. Just very little output. Do you
> > have
> > > a number to customer service? Also do you think it would be bad to
use
> > the
> > > headphone output for now? Becasue I use this synth live and have gigs
> > > coming up. Also could it be some how one of my other pieces of gear
> that
> > > casued the problem. I have a rolls rack mixer and a korg mono poly
> > running
> > > through it too. With an older yamaha mixer I had the mono poly would
> cut
> > > the output on the rest of the synths to almost nothing. I think it
was
> > just
> > > the mixer tho.
> > >
> > > TIA,
> > > Jake
> > >
> > > ----- Original Message -----
> > > From: <jondl_2000@...>
> > > To: <AN1x-list@yahoogroups.com>
> > > Sent: Wednesday, July 11, 2001 9:16 PM
> > > Subject: [AN1x-list] Re: outputs
> > >
> > >
> > > > --- In AN1x-list@y..., "Jake B" <drummer@p...> wrote:
> > > > > The outputs on my An1x have hardly any output. It seems like they
> put
> > > out some sound and then fade off really quick. The headphone output
> works
> > > fine but the main left and right is very low. Any ideas what could
> casue
> > > this? It was working fine and then nothing.
> > > > >
> > > > > TIA,
> > > > > Jake
> > > > >
> > > > >
> > > >
> > > > Yikes!
> > > >
> > > > Jake, I've not heard of that problem with an AN1x. Has anybody else
on
> > > > the list?
> > > >
> > > > Did your AN1x ever exhibit the infamous 'popping and clicking' sound
> at
> > > > start-up? If so, did you (or a previous owner?) ever have the repair
> > > > affected by Yamaha? I ask these questions only to see if there's any
> > > > relation between the old problem (the audible crackling) and the
> > > > problem you've descibed (audio drop-off.)
> > > >
> > > > I'd hazard a guess this is a service issue and encourage you to
> contact
> > > > Yamaha Customer Assistance or a local Service Center. Prefably one
> that
> > > > you TRUST!. FWIW - I had the hardware repair for the 'old' problem
> > > > completed some time ago and have never had a reoccurence.
> > > >
> > > >
> > > > HTH,
> > > >
> > > > Jon
> > > >
> > > >
> > > >
> > > > Community email addresses:
> > > > Post message: AN1x-list@yahoogroups.com
> > > > Subscribe: AN1x-list-subscribe@yahoogroups.com
> > > > Unsubscribe: AN1x-list-unsubscribe@yahoogroups.com
> > > > List owner: AN1x-list-owner@yahoogroups.com
> > > >
> > > > Shortcut URL to this page:
> > > > http://groups.yahoo.com/group/AN1x-list
> > > >
> > > >
> > > > Your use of Yahoo! Groups is subject to
> > http://docs.yahoo.com/info/terms/
> > > >
> > > >
> > > >
> > > >
> > >
> > >
> > > Community email addresses:
> > > Post message: AN1x-list@yahoogroups.com
> > > Subscribe: AN1x-list-subscribe@yahoogroups.com
> > > Unsubscribe: AN1x-list-unsubscribe@yahoogroups.com
> > > List owner: AN1x-list-owner@yahoogroups.com
> > >
> > > Shortcut URL to this page:
> > > http://groups.yahoo.com/group/AN1x-list
> > >
> > >
> > > Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
> > >
> > >
> >
> >
> > Community email addresses:
> > Post message: AN1x-list@yahoogroups.com
> > Subscribe: AN1x-list-subscribe@yahoogroups.com
> > Unsubscribe: AN1x-list-unsubscribe@yahoogroups.com
> > List owner: AN1x-list-owner@yahoogroups.com
> >
> > Shortcut URL to this page:
> > http://groups.yahoo.com/group/AN1x-list
> >
> >
> > Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
> >
> >
> >
> >
>
>
> Community email addresses:
> Post message: AN1x-list@yahoogroups.com
> Subscribe: AN1x-list-subscribe@yahoogroups.com
> Unsubscribe: AN1x-list-unsubscribe@yahoogroups.com
> List owner: AN1x-list-owner@yahoogroups.com
>
> Shortcut URL to this page:
> http://groups.yahoo.com/group/AN1x-list
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>