Sometimes the doctor has to ask personal questions that may embarrass you
like, "How far was your nose in the young ladies room before she slammed the
door on it?" In your case we'd have to ask, "What are/were you running your
outputs into? The output circuitry is looking for a standard line level
load such as a mixer, keyboard amp or similar input, and without the proper
load for the An1x final amps all sorts of bad things may happen in the
signal chain.
Ed Edwards
Leader: Ezekiel's Wheel »»»»Retro-Progressive Rock««««
http://www.untiedmusic.com/ezekielhttp://artists.mp3s.com/artists/227/ezekiels_wheel.html°·.·°·.·°·.·°·.·°·.·°·.·°·.·°·.·°·.·°·.·°·.·°·.·°·.·°·.·°·.·°·.·°·.·°
°·.·°·.·°·.·°·.·°
----- Original Message -----
From: "Jake B" <drummer@...>
To: <AN1x-list@yahoogroups.com>
Sent: Wednesday, July 11, 2001 11:15 PM
Subject: Re: [AN1x-list] Re: outputs
> nope...no clicking or poping at all. Just very little output. Do you
have
> a number to customer service? Also do you think it would be bad to use
the
> headphone output for now? Becasue I use this synth live and have gigs
> coming up. Also could it be some how one of my other pieces of gear that
> casued the problem. I have a rolls rack mixer and a korg mono poly
running
> through it too. With an older yamaha mixer I had the mono poly would cut
> the output on the rest of the synths to almost nothing. I think it was
just
> the mixer tho.
>
> TIA,
> Jake
>
> ----- Original Message -----
> From: <jondl_2000@...>
> To: <AN1x-list@yahoogroups.com>
> Sent: Wednesday, July 11, 2001 9:16 PM
> Subject: [AN1x-list] Re: outputs
>
>
> > --- In AN1x-list@y..., "Jake B" <drummer@p...> wrote:
> > > The outputs on my An1x have hardly any output. It seems like they put
> out some sound and then fade off really quick. The headphone output works
> fine but the main left and right is very low. Any ideas what could casue
> this? It was working fine and then nothing.
> > >
> > > TIA,
> > > Jake
> > >
> > >
> >
> > Yikes!
> >
> > Jake, I've not heard of that problem with an AN1x. Has anybody else on
> > the list?
> >
> > Did your AN1x ever exhibit the infamous 'popping and clicking' sound at
> > start-up? If so, did you (or a previous owner?) ever have the repair
> > affected by Yamaha? I ask these questions only to see if there's any
> > relation between the old problem (the audible crackling) and the
> > problem you've descibed (audio drop-off.)
> >
> > I'd hazard a guess this is a service issue and encourage you to contact
> > Yamaha Customer Assistance or a local Service Center. Prefably one that
> > you TRUST!. FWIW - I had the hardware repair for the 'old' problem
> > completed some time ago and have never had a reoccurence.
> >
> >
> > HTH,
> >
> > Jon
> >
> >
> >
> > Community email addresses:
> > Post message: AN1x-list@yahoogroups.com
> > Subscribe: AN1x-list-subscribe@yahoogroups.com
> > Unsubscribe: AN1x-list-unsubscribe@yahoogroups.com
> > List owner: AN1x-list-owner@yahoogroups.com
> >
> > Shortcut URL to this page:
> > http://groups.yahoo.com/group/AN1x-list
> >
> >
> > Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
> >
> >
> >
> >
>
>
> Community email addresses:
> Post message: AN1x-list@yahoogroups.com
> Subscribe: AN1x-list-subscribe@yahoogroups.com
> Unsubscribe: AN1x-list-unsubscribe@yahoogroups.com
> List owner: AN1x-list-owner@yahoogroups.com
>
> Shortcut URL to this page:
> http://groups.yahoo.com/group/AN1x-list
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>