Or may be even scale down the aftertouch values after recording from AN-1x
(in the software sequencer) or (as AN-1x sends too 'discrete' values of
aftertouch) re-draw the aftertouch graphic looking at the original ...
Ray.
jondl_2000@... wrote:
> The velocity control is independent of aftertouch on the AN1x. There
> is no control on the AN1x to reduce the amount AT transmitted from
> the keyboard. You'll need to reduce the modulation depth setting at
> the destination MIDI module as Ray already suggested.
>
> If you are using a software sequencer you could apply a filter to
> exlude AT. Some programs permit this as a global setting but it might
> be possible at the track level as well - depends on the program.
>
> regards,
>
> Jon
>
> --- In AN1x-list@y..., dbase789@a... wrote:
> > Hy. Don't know if it is precisely what your looking at, but you
> > should try -if not already- to lower the velocity of the key board.
> > it's in Utility/Setup third switch..
> > I think there i a way to disable or minor the AT sensitivity, but
> > can't tell you how precisely.
> > Hope it can help.
> >
> > --- In AN1x-list@y..., midisys@f... wrote:
> > > When i play samples on my Akai S2000 and using the AN1x to
> trigger
> > > the samples, the samples play with to much aftertouch.
> > > When i trigger the samples with another kb the samples sound o.k.
> > > Is it possible to adjust the aftertouch on my AN1x?
> > > I looked at the manual but coud'nt find it...
> > >
> > > thanx in advance
> > > Johan van Beek
>
> Community email addresses:
> Post message: AN1x-list@yahoogroups.com
> Subscribe: AN1x-list-subscribe@yahoogroups.com
> Unsubscribe: AN1x-list-unsubscribe@yahoogroups.com
> List owner: AN1x-list-owner@yahoogroups.com
>
> Shortcut URL to this page:
> http://groups.yahoo.com/group/AN1x-list
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
--
http://www.mp3.com/raymaxer - full tracks and CD !