Hello Gerry,
--- In
AN1x-list@egroups.com, Mario Xavier Alvarez Tajes <xavier@i...>
wrote:
> Maybe this link is usefull for you.
>
> http://www.jdlx-musique.com/support/an1x/tt_midiclk.htm
> <http://www.jdlx-musique.com/support/an1x/tt_midiclk.htm>
>
> -----Mensaje original-----
> De: Gerry Bolda [mailto:tam_ger@h...]
> Enviado el: Viernes, 12 de Enero de 2001 07:01 p.m.
> Para: AN1x-list@egroups.com
> Asunto: [AN1x-list] problem with midi synch for the arpeg and seq function
>
>
> This should be an easy fix, but here's what's going on.
> I have a midi clock signal from either cakewalk or my 505 going into
> the AN1x. In order to play a sequence on the anx i reduce the midi
> tempo switch all the way down until it reads "midi". Now if press
> any of the keys the arp or seq I get a single note, but no sequence.
That's normal behaviour for the AN1x. When you set the AN1x to
synchronize to MIDI Clock the AN1x has to be receiving the MIDI Clock
signal for the ARP/SEQ to trigger at Note On. Truth be told, I find it
annoying behavior too :-/ Same goes for the fact the ARP/SEQ won't
trigger with LOCAL=OFF. ∗sigh∗
If I'm not mistaken, Ed has a pet peeve that there is no provision to
stop/start the ARP/SEQ Hold from an external controller (other than the
front panel button.) On the plus side, at least each scene in a voice
can have seperate trigger options - that lets you create splits or
layers with some flexibility. Overall, I like the ARP/SEQ - but Yamaha
did overlook a couple of "niceties", IMO.
>
> Yes i have the receive channel set to the correct setting, (not that
> it should matter for a clock signal)
>
> The only way i can get it to work is by shutting off the power and
> restarting. The settings remain, but now i can play a sequence in
> time.
After you changed the tempor to MIDI, and before powering off, did you
∗save∗ your AN1x Voice? Remember, the tempo parameter is saved at the
voice level - NOT globally. From your description I would hazard a
guess that the ARP/SEQ is triggering at the previous tempo not to MIDI
clock - easy enough to double check.
>
> Has anyone had this problem? Is there a work around?
>
HTH
regards,
Jon