Hi Silli
With the AN1x you have the following options:
VCO1/VCO2:
Use the Pulse Width Modulation Source parameter and select the required LFO
(1 or 2)
Use the PMOD parameter to set the depth of modulation provided by LFO1
In VCO1 you can also assign the FM Source (1 or 2) to the LFO (1 or 2)
VCF:
Use the FMOD parameter to alter the depth of LFO1 applied to the filter
VCA:
Use the AMOD parameter to alter the depth of LFO1 applied to the amp EG
With the PLG150AN the parameters are similar....but you also have the option
of assigning LFO2 as the modulation source for PMOD, FMOD and AMOD.
If you are using An1xEdit, let the mouse hover over the controls to get a
tool tip description of what each parameters is (and the LFO source).
Regards
Gary
Email:
gary@...http://www.yme.co.uk/yme > -----Original Message-----
> From: silli [mailto:stinktier@...]
> Sent: 19 November 2000 19:00
> To: AN1x-list@egroups.com
> Subject: [AN1x-list] lfo
>
>
> how can i route the lfo to the vco/vcf/vca?
>
>
>